of a sht 1 10 awg, 30 amp rev sd01361 right angle solder mount power snap c angles: 2 scale: 4:1 inches ronics t lec wallingford, connecticut 06492 cwb 62 barnes industrial road north 04/14/08 cwb date appd by er7306 description c rev 10/15/03 jed date approved 10/15/03 sd date approved 10/15/03 cwb date approved 10/15/03 jem date drawn revised per drawing customer winchester electronics corporation e er t w per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] 1 recommended cable trim dimensions scale: 2:1 .271 6.88 .167 4.24 8.97 3.71 .08 .03 .003 4.72 .186 .353 3.66 .144 .001 .146 .275 6.99 .218 - .000 +.010 5.54 .00 +.25 across flats catalog p/n: 01361 notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: brass per astm b16. 3. finish specifications: body: .000030 min gold per astm b488 over .000050 min nickel per ams-qq-n-290 4. electric al specifications: current rating: 30 amp 5. for use with 10 ga. or equivalent wire. 6. refer to cap10-01 for cable assembly procedure.
|
